Payment & Shipping Terms:
|Prouduct Name:||Vertical Milling Machining Center||Service:||Overseas Service|
|Spindle Speed Range:||10,000 Rpm||Spindle Head Casing Aperture:||φ140mm|
|Cnc Or Not:||CNC||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
|Voltage:||380V,Customer Requirement||Table Size:||1000*500mm|
|Table Travel (mm):||800/500/500||Color:||Optionl Red Or White Or Other Color|
small cnc milling machine,
cnc router milling machine
Automatic Lubrication System 7.5 KW FANUC spindle motor CNC Milling Machine For Car industry
1. With LCD display X-axis, Y-axis, Z-axis, 4-axis coordinate values, resolution 1 micron;
2. With magnification display 1X, 10X, 100X; with axis selection display X, Y, Z axis;
3. Hand pulse generator has power on/off key, forward, reverse, continuous, display clear four buttons, handwheel enable button, handwheel open button;
4. Handwheel open button: When holding the handwheel open button and then shaking the handwheel, the handwheel will have an effect. Otherwise, the handwheel will not work;
5. All buttons and shaft selection switches and override switches are designed with waterproof structure, dustproof, waterproof and long service life;
6. The transmission distance is long, the operation is stable under 40 meters; the cement wall can penetrate 15CM, normal use;
7. With signal strength display, indicating signal connection quality.
|Max. load of worktable||kg||400|
|T slot no./width/distance||mm||18x5x90|
|Spindle||spindle nose to table surface||mm||150-650|
|spidle axis to column surface||mm||572|
|Spindle head casing aperture||mm||φ140mm|
|Spindle driver||-||Belt transmission|
|Motor capacity||Controller||Syntec 22MA|
|Spindle motor (continuous / 15 minutes)||kW||7.5/11|
|Servo motor (X/Y/Z)||kW||2.6/2.6/3.0|
|Automatic lubrication device||w||35|
|Cutting fluid pump||w||840|
|Others||Air source pressure demand||kg/cm||6|
|Cutting water tank capacity||L||250|
|Floor area and height||mm||2550*2250*2400|
Auto Chip conveyor
The device has the advantages of serialization, generalization and standardization, simple operation, reliable operation, convenient disassembly and assembly, and easy maintenance. It can also be used in conjunction with other chip evacuation devices to form a variety of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a conveying device for small parts of stamping and cold pier machine tools.
2. High conveying efficiency and large selection range of conveying speed;
3. The width of the chain plate is diversified, and the structural form is divided into two types: a seamless chain plate and a seam chain plate. 4, streamlined shape, beautiful appearance, smooth chip removal;
4. With overload protection.
Oil cooled system for spindle
1. Oil temperature control is based on the body temperature (room temperature). The user can set the oil temperature according to the temperature of the body to prevent thermal deformation of the mechanical structure.
2. Immersed oil cooling and temperature control device is free from impurities, is not interfered by cutting metal powder, etc. It is easy to clean and easy to maintain; it is easy to install and does not take up space.
3, with automatic fault alarm function, can promptly remind the user to repair the device in a specific way, so as to avoid damage to the machine.
Fanuc servo motor
The FANUC servo is a high-speed, high-precision and high-efficiency intelligent servo system. The compact structure enables high-speed, high-precision and energy-saving machine tools.
Nano Control: Rotating extremely smooth servo motor, 32 million/REV high resolution pulse encoder, high precision current sense servo amplifier, high speed, high precision servo HRV control
High-speed, high-efficiency: high-speed, high-speed electric spindle can be realized by winding switching, and the spindle HRV control with increased speed and fast response can be realized.
Compact body, saves wiring: short body servo and spindle motor, space-saving thin servo amplifier.
Improve maintenance performance: ID and motor temperature information for quick maintenance, built-in insulation degradation detection function, global preventive maintenance.
Automatic lubrication system
The automatic lubrication system solves the machine fault caused by the frequent lubrication in the long-term use of the machine, and has the lubrication system alarm function. The lubrication method is simple and reliable, and the oil lubrication and circulation time can be automatically adjusted according to the working state of the machine tool to save lubricating oil. It is automatically lubricated at start-up and can be lubricated according to the time interval set by the user. The automatic lubrication system is designed with overload detection, oil level detection and pressure detection to prompt the operator to stop the inspection.
Triaxial slide rail retractor
The machine guard is used to protect the machine guide rails. He protects the machine's internal hard rails, linear guides and ball screws or drive racks from external corrosion and damage. It can effectively prevent the entry of chips and other sharp objects, and can effectively reduce the penetration of coolant through certain structural measures and suitable scraping plates.
The steel plate shield has a good seal and can prevent iron filings, anti-cooling liquid and anti-tool accidents.
1. Sturdy and durable, stable operation, low noise and beautiful appearance;
2, steel plate shield is suitable for high-speed motion machine tool rail protection is stable and no vibration noise;
3. The steel plate cover device not only protects the service life of the guard plate, but more importantly ensures the precision of the machine tool;
4. Each guard plate of the steel plate shield is pulled apart in parallel at the same time, and is simultaneously retracted in parallel, and runs freely;
5, the steel plate shield will not make the guard plate disjointed, there is impact sound, both beautiful and improve the service life of the guard plate;
6. On the basis of the original sealing strip, a layer of stainless steel cover is added to prevent the high temperature burn strip of iron filings from rubbing into the rail surface and pulling the guide rail.
Contact Person: Sophie Lau