Payment & Shipping Terms:
|Prouduct Name:||Vertical Milling Machining Center||Usage:||Cutting|
|Size:||1000*500 ( Mm )||Condition:||New|
|Warranty:||2 Years||Weight:||5000 Kg|
small cnc milling machine,
cnc router milling machine
Light Alloy Series Processing CNC Milling Machine 3 Axis
Suitable for mass production of auto parts, aerospace, automatic production lines of parts, communications, fixtures, molds and so on.
1.The use of fully closed knife library, the processing environment is not easy to enter the scrap iron.Ensure the service life of the tool storehouse, reduce the failure of changing the tool, prolong the service life of the spindle, and ensure the precision of machining.
2.Three axis roller type rail, lengthen and widen flange slider, and guide rail contact surface wide, bear the load, increase machining rigidity, machining stability, improve the accuracy can replace the hard rail.
3.The use of double pump is one of the cooling tools required when processing the workpiece, the other is at the same time can be processed out of the production of debris, these are many manufacturers do not want to increase the cost, but we never cut corners.
4.We know well that machine tool bed is the core foundation of machine tool, so we pay much attention to casting material and machining precision.Strong reinforcing bars are used inside the casting to ensure the stability and rigidity of the bed. Strictly controlled triaxial installation and adjustment of geometric accuracy.
5.Three axis screw after strict pre-tension treatment, with exquisite shoveling technology and balanced torque screws, all this can make the machine as stable as mount tai, ensure the processing accuracy.
|Table||Working size||1000*500 mm|
|weight capacity||400 kg|
|T-slot size||18x5x90 mm|
|Travel||X-axis travel||800 mm|
|Y-axis travel||500 mm|
|Z-axis travel||500 mm|
|Spindle||Distance from spindle nose to work table||150-650 mm|
|Distance from spindle center to column||572 mm|
|Spindle speed||10,000 rpm|
|Spindle head casing aperture||φ140mm|
|Spindle transmission||Belt spindle|
|Spindle power (kw)||7.5/11 kw|
|Servo motor(X/Y/Z)||1.8/1.8/3.0 kw|
Fanuc servo motor
The FANUC servo is a high-speed, high-precision and high-efficiency intelligent servo system. The compact structure enables high-speed, high-precision and energy-saving machine tools.
Nano Control: Rotating extremely smooth servo motor, 32 million/REV high resolution pulse encoder, high precision current sense servo amplifier, high speed, high precision servo HRV control
High-speed, high-efficiency: high-speed, high-speed electric spindle can be realized by winding switching, and the spindle HRV control with increased speed and fast response can be realized.
Compact body, saves wiring: short body servo and spindle motor, space-saving thin servo amplifier.
Improve maintenance performance: ID and motor temperature information for quick maintenance, built-in insulation degradation detection function, global preventive maintenance.
Due to the rolling friction method, when the linear guide is used as the linear guide, not only the friction coefficient is reduced to 1/50 of the sliding guide, but also the difference between the dynamic friction and the static friction is small. Therefore, when the bed is running, there is no slippage, the positioning accuracy of μm can be achieved, and the machine can maintain the accuracy for a long time. The power loss of the machine can be significantly reduced, and the heat generated by the friction is small, which is suitable for high-speed operation. The special beam structure design can bear the load in the up, down, left and right directions at the same time. Easy to assemble, it maintains accuracy and is interchangeable, allowing you to replace sliders or rails or even linear guide sets. The lubrication structure is simple and easy to oil.
The KENTURN CNC machining center spindles are very hard with very low runout tolerances and speeds up to 10,000 rpm. These high-precision, high-speed spindles are available in a range of sizes and are guaranteed to provide smooth operation and long life.
Automatic lubrication system
The automatic lubrication system solves the machine fault caused by the frequent lubrication in the long-term use of the machine, and has the lubrication system alarm function. The lubrication method is simple and reliable, and the oil lubrication and circulation time can be automatically adjusted according to the working state of the machine tool to save lubricating oil. It is automatically lubricated at start-up and can be lubricated according to the time interval set by the user. The automatic lubrication system is designed with overload detection, oil level detection and pressure detection to prompt the operator to stop the inspection.
Full cover shroud
The utility model comprises a lower protective front baffle, a lower protective left baffle, a lower protective tail baffle, a lower protective right baffle, an upper protective front panel, an upper protective left panel, an upper protective rear panel and an upper protective right panel, the lower protective front The baffle, the lower protective left baffle, the lower protective baffle and the lower protective right baffle are sequentially connected to form a rectangular lower protective frame, the upper protective front panel, the upper protective left panel, the upper protective rear panel and the upper protective right The panels are sequentially connected to form a rectangular upper protective frame placed on the rectangular lower protective frame and connected to each other; the upper protective front plate is provided with a front window, and the front window is provided with a laterally laterally outer side Door, left inner door, right inner door and right outer door. The utility model has the advantages of simple structure, reasonable design, effective protection for the processing center, convenient opening, and favorable daily maintenance operation.
Contact Person: Sophie Lau