Payment & Shipping Terms:
|Working Size:||1300 Mm * 2500 Mm * 200 Mm||Relative Humidity:||30%~75%|
|Working Voltage:||AC380V/50HZ, 220V/50HZ 3 Phase (Standard) And Others||Zones No.:||8 Zones In Vacuum Table|
3 axis cnc wood router,
3 axis cnc router engraver
NC-studio Control system Mist Cooling System 3 Axis CNC Router Machine For Alucobond Engraving
This type CNC engraving machine is added mist cooling system for Alucobond engraving and cutting.
1. Big steel tube structure, so the machine’s body is strong, reliable and durable. It is with large bearing capacity and long working life;
2. Humanized and beautiful designing. Breakpoint specific memory to keep the carving status when power off, processing time forcast and other functions in case of the accidental power outages. Stop Emergency Buttons , emergent shutdown during unexpected accidents and do no harm to human;
3. Multi spindles can work at the same time,also can work alone, many times increasing inefficiency. can also control the machine heads independently, can use only one head to process and make increasing the working area;
4. This machine is very suitable for furniture bulk production such as desk legs/stair handrails and other column /cylinder products,it also can easily engrave 360 degree human body, Buddhist statue, sculpture and other art works;
5. Compatible with many CAD/CAM software, such as Type3, Artcam, Castmate, Wentai, etc.
|Table Size||1300 mm * 2500 mm * 200 mm|
|Spindle||4.5KW air cooling Spindle|
|Inverter||5.5 KW Delta Inverter|
|Control System||NC-studio Control System|
|Special part||Rails protect shell|
|For metal Engraving||Mist cooling system|
|Table Type||Vacuum Table|
|Motor And Driver||Stepper motor and driver|
|Body Structure||Heavy duty body|
|Rail||Hiwin 25 mm square rail|
|Z Axis Transmission||Taiwan Ball Screw Transmission|
|X,Y Axis Transmission||Gear And Rack Transmission|
|Others||USB interface, Filter, tool sensor etc|
Hiwin and PTM Square Rail
We choose square rail for our cnc router. Bucause compare with round rail, square rail could bear qaual force in all directions, could ensure the accuracy and strength of the machine. Square rail is more suitable for high-speed move and greatly reduce the drive horsepower the machine required.
We usually adopt Hiwin and PTM rail (from Taiwan) in CNC router machine. It well known as low price and high quality, value for money. It work for more than 3 year without rust.
Heavy duty body
Heavy duty body are made by 15 mm steel square tube and beam, adopt welded with seamless welded structure. Annealing in high temperature and vibrating stress relief. The body with big weight, could keep good stability without deformation in long time working vibration.
NC Studio Control System
NC studio System is very different from other Control system, it provides a PC Screen, you coul see the toolpath and tool position on PC screen. Operator could control the PC on-site, and make a change without moving if nesscery. It’s a control card installed in control box, and connect PC on-site. Adopts power-off protection ,breakpoint restoration ,smooth processing.
Leadshine stepper Motor and Driver
Leadshine stepper Moter and Driver is widely adopted in Chinese CNC router, It’s cheaper and high accuracy. It won’t lose step in working, speed performance increased about 30%, improve the equipment speed heavily. Motor heat fell down 30%,prolong the life time of the motor. Vibration phenomenon significantly reduced,motor run more smoothly. Adopted the current control system technology,save power consumption
Contact Person: Sophie Lau