Payment & Shipping Terms:
|Working Size:||1300 Mm * 2500 Mm * 200 Mm||Working Voltage:||AC380V/50HZ, 220V/50HZ 3 Phase (Standard) And Others|
|Warranty:||2 Years||Traveling Speed:||>25000mm/min|
|Machine Accuracy:||0.03mm||Suitable Software:||Artcam, Type3, Ucancam V9,etc|
MDF Cabinet door carving NC-studio 3 Axis CNC Router Machine With Mist Cooling System
This type CNC engraving machine is installed mist cooling system for engraving Alucobond and added Rails protect shell to keep the rails away from the dust.
1. Welded Square steel tube structure as a whole with vibration Temper aging treatment ensures won't out of shape for a long working time.Cast iron Gantry, the structure is strong and stable;
2. 4.5KW water cooling spindle which is with stable performance, lower noise, powerful and higher torque, matched with Taiwan import Delta frequency inverter;
3. Imported Taiwan famous brand Hiwin Linear square guide rail with ball bearing slide block which could make sure high weight capacity, high precision, smooth and steady running. Adopt imported precision ball screws, tools feeded with more accuracy;
4. China famous Leadshine stepper motor and driver for XYZ-axis, high precision, faster speed and more stable, dual motor Y axis with traveling speed faster than 25000 mm/min;
5. Double bag dust collector could help to suck dust, milling dust, keeping machine cleaning;
6. Powerful Break-point memory, automatic home/origin correction and power failure resuming function, effectively ensure long time working precision.
|Table Size||1300 mm * 2500 mm * 200 mm|
|Special part||Rails protect shell|
|For metal Engraving||Mist cooling system|
|Spindle||4.5KW air cooling Spindle|
|Inverter||5.5 KW Delta Inverter|
|Control System||NC-studio Control System|
|Motor And Driver||Stepper motor and driver *4|
|Table Type||Vacuum Table|
|Body Structure||More thickness steel pipe welded machine holder bed, cast iron gantry|
|Rail||Hiwin 25 mm square rail|
|Z Axis Transmission||Taiwan Ball Screw Transmission|
|X,Y Axis Transmission||Gear And Rack Transmission|
|Others||USB interface, Filter, tool sensor etc|
Leadshine stepper Motor and Driver
Leadshine stepper Moter and Driver is widely adopted in Chinese CNC router, It’s cheaper and high accuracy. It won’t lose step in working, speed performance increased about 30%, improve the equipment speed heavily. Motor heat fell down 30%,prolong the life time of the motor. Vibration phenomenon significantly reduced,motor run more smoothly. Adopted the current control system technology,save power consumption.
Inverter is controler of spindle, it control the start, speed and stop of spindle. We usually adopt Taiwan Detla inverter and shanghai Fuling inverter.
Delta’s inverter combined with DC power systems, could provide a modular UPS for AC power backup. The system can operate in economy mode. When in normal opoeration the total installation’s energy efficiency could be optimized automatically. In regions with AC utility challenges, the auxiliary AC-powered infrastructure is protected by the inverter system from AC mains fluctuations. Further more, the inverter system offers new opportunities for energy savings through providing backup AC power.
Ball secrew transmission
Ball secrew transmission is slow but more stabile transmission type. Widely used in CNC router Z axis, and X, Y and Z axis for mini cnc router. It could provide powerful guarantee of machine’s accuracy and working life.
NC Studio Control System
NC studio System is very different from other Control system, it provides a PC Screen, you coul see the toolpath and tool position on PC screen. Operator could control the PC on-site, and make a change without moving if nesscery. It’s a control card installed in control box, and connect PC on-site. Adopts power-off protection ,breakpoint restoration ,smooth processing.
Our vacuum table is made by aluminum and covered by double hard PVC layer. Don’t need human fix the material and absorb the material automatically. We usually adopt 6 zones vacuum table, and could make customized type according your need. Vacuum table is better for plate engraving with vacuum pump. However if you need cut your materials, you'd better choose fixture to hold the materials. Vacuum table also have T-slot to handle materials cutting work.
Contact Person: Sophie Lau