Payment & Shipping Terms:
|Alis:||4 Axis CNC Router Machine||Working Size:||1500 Mm * 3000 Mm * 200 Mm|
|Spindle Speed:||0-24000 R/Min||Voltage:||AC 380V+ 10%, 50/60Hz, Three Phases Or AC 220V+ 10%, 50/60Hz, Single|
Syntec Control System Error Alarm 4 Axis CNC Milling Machine For Mold Engraving
This type 4 axis CNC Router could swing spindle from left to right, could engraving the plate edge in different angles.
1. Simple operation: The automatic typesetting software matched with the machine can automatically optimize the typesetting by inputting the size of the board, and generate the processing code. The average worker can easily get on the job after 3-5 hours of training, reducing the dependence of the enterprise on the skilled worker.
2. Labor saving: The previous equipment for pushing the table saw and so on requires two people to operate. The worker keeps turning the plate, adjusts the ruler, and the work intensity is large. The machine can operate multiple machines by one person, and the work intensity is small, thus saving labor. cost;
3. Material saving: The computer automatically optimizes the typesetting, and it is easy to increase the utilization rate of the board.
4.Time saving: computer automatic typesetting, the efficiency is much higher than manual calculation, saving typesetting time. The machine is equipped with an automatic positioning cylinder, which does not need to be repositioned after loading, saving time for feeding. The vacuum adsorption table can fix small size plates (can absorb the size of 1⁄2 A4 paper), ensuring that the plates are not displaced during processing, no need to use fixtures to save the clamping time;
5. The quality of the blank is high: the plate cutting has no chipping phenomenon and the size is accurate, which provides effective protection for the later installation;
6. Shaped cutting: The cutting machine adopts the cutter cutting method to cut any shape. At the same time, the automatic typesetting software can also optimize the typesetting to make the shaped cutting faster and more accurate;
7. Improve the working environment of workers: The professional vacuum design can absorb 96% of the dust during the process, which changes the working environment of the traditional sliding table saw dust.
|Model||DHRM-1530 4 AXIS|
|The Most Special Parts||Swing Spindle|
|Working Area||1500 mm * 3000 mm * 200 mm|
|Spindle||9.0 KW HSD Spindle * 1|
|Rail||Hiwin 25 mm square rail|
|Table Type||Vacuum table with 4 Zones|
|Body Structure||Vibration Temper aging treatment Body|
|Control System||Syntec Control System|
|Inverter||11 KW Delta Inverter|
|Motor And Driver||Yaskawa Servo Motor and drivers * 5|
|X,Y Axis Transmission||Gear And Rack Transmission|
|Z Axis Transmission||Taiwan Ball Screw Transmission|
|Others||USB interface, Filter, tool sensor, Vacuum pump etc|
Hiwin Square Rail
We choose square rail for our cnc router. Bucause compare with round rail, square rail could bear qaual force in all directions, could ensure the accuracy and strength of the machine. Square rail is more suitable for high-speed move and greatly reduce the drive horsepower the machine required.
We usually adopt Hiwin (from Taiwan) in CNC router machine. It well known as low price and high quality, value for money. It work for more than 3 year without rust.
HSD Air Cooling Spindle
HSD quick-change air-cooled and liquid-cooled motor spindles are world leaders in the machining of wood, aluminium and plastics. The spindles, produced in their thousands, are characterised by their extremely high reliability andthe wide range of powers and operating speeds available.
YASKAWA Servo Motor and Driver
Compare with stepper motor and driver, Servo motor has lots of good functions.
Better working accuracy, no vibration phenomenon in low speed, constant torque output in higher speed, strong overload ability, more reliable and much faster responding speed. Servo motor and driver is sutable for high end CNC router for higher request.
YASKAWA and Simens is the most popular brand in CNC router industry.
Heavy duty body
Heavy duty body are made by 15 mm steel square tube and beam, adopt welded with seamless welded structure. Annealing in high temperature and vibrating stress relief. The body with big weight, could keep good stability without deformation in long time working vibration.
Syntec Control System
Syntec control system usually adopted in high end CNC router for multi function. It could be used in ATC CNC router, single arm CNC router, auto-loading & unloading CNC router, Oscillating knife CNC router etc.
It is afforable, good with after-sales service, and is currently the most complete domestic product line, the most potential for development of professional PC based CNC controller brand.
The operation interface is designed according to human visual sense system, which makes people's visual sense to reach the most comfortable state. Portable hand-held remote control unit greatly facilitates tool setting, test cutting, processing and security.
Contact Person: Sophie Lau