Payment & Shipping Terms:
|Positioning Accuracy (mm):||±0.005||Condition:||New|
|After-sales Service Provided:||Commissioning And Training||Color:||Optionl Red Or White Or Other Color|
|Certification:||CE/ISO,CE ISO SGS||Cnc Or Not:||CNC|
|Voltage:||380V,220V,Customer Requirement||Spindle Taper:||BT40,R8/NT30,ER32|
|Warranty:||2 Years||Product Name:||CNC Milling Machine|
7.5 KW FANUC Spindle Motor NSK Ball Screw Bearing Cnc Vertical Machining Center For Finish Machining
1. Engineers are available to offer oversea machinery service;
2. Warranty is two year, we would offer the parts (quality problem) free of charge during this period;
3. We offer best agent price and distributer price;
4. Training in our factory and on-line are free of cost.
|Max. load of worktable||kg||400|
|T slot no./width/distance||mm||18x5x90|
|Travel||X axis travel||mm||800|
|Y Axis travel||mm||500|
|Spindle||spindle nose to table surface||mm||150-650|
|Spindle driver||-||Belt transmission|
|spidle axis to column surface||mm||572|
|Spindle head casing aperture||mm||φ140mm|
|Auto tools change||Maximum tool diameter||mm||Φ80(Φ130)|
|Maximum tool length||mm||300|
|Maximum tool weight||kg||8|
|Tool exchange method||-||Knife arm|
|Tool magazine capacity||Pieces||24|
|Tool exchange time (knife-to-knife)||Sec||1.8|
Auto Chip conveyor
The device has the advantages of serialization, generalization and standardization, simple operation, reliable operation, convenient disassembly and assembly, and easy maintenance. It can also be used in conjunction with other chip evacuation devices to form a variety of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a conveying device for small parts of stamping and cold pier machine tools.
2. With overload protection;
3. The width of the chain plate is diversified, and the structural form is divided into two types: a seamless chain plate and a seam chain plate. 4, streamlined shape, beautiful appearance, smooth chip removal.
4. High conveying efficiency and large selection range of conveying speed.
The KENTURN CNC machining center spindles are very hard with very low runout tolerances and speeds up to 10,000 rpm. These high-precision, high-speed spindles are available in a range of sizes and are guaranteed to provide smooth operation and long life.
the whole machine adopts GB300 advanced resin sand castings, and the internal stress is eliminated by tempering treatment and vibration and natural aging treatment. One-piece upper water-disc type wide base, five large parts are mesh internal structure, bottom ultra-wide "human" shaped column, triangular inverted T-shaped middle sliding seat, body oil-water separation structure (pre-water after oil), built-in Pipeline. the body oil and water separation design, the oblique angle discharge port and the swarf all aspects design, the rigidity of the body, easy to remove the chips and the cutting fluid is not easy to smell and leak, and so on, using the front chip removal method.
Effectively enhance dynamic accuracy and service life.
Full cover shroud
The utility model comprises a lower protective front baffle, a lower protective left baffle, a lower protective tail baffle, a lower protective right baffle, an upper protective front panel, an upper protective left panel, an upper protective rear panel and an upper protective right panel, the lower protective front The baffle, the lower protective left baffle, the lower protective baffle and the lower protective right baffle are sequentially connected to form a rectangular lower protective frame, the upper protective front panel, the upper protective left panel, the upper protective rear panel and the upper protective right The panels are sequentially connected to form a rectangular upper protective frame placed on the rectangular lower protective frame and connected to each other; the upper protective front plate is provided with a front window, and the front window is provided with a laterally laterally outer side Door, left inner door, right inner door and right outer door. The utility model has the advantages of simple structure, reasonable design, effective protection for the processing center, convenient opening, and favorable daily maintenance operation.
Due to the rolling friction method, when the linear guide is used as the linear guide, not only the friction coefficient is reduced to 1/50 of the sliding guide, but also the difference between the dynamic friction and the static friction is small. Therefore, when the bed is running, there is no slippage, the positioning accuracy of μm can be achieved, and the machine can maintain the accuracy for a long time. The power loss of the machine can be significantly reduced, and the heat generated by the friction is small, which is suitable for high-speed operation. The special beam structure design can bear the load in the up, down, left and right directions at the same time. Easy to assemble, it maintains accuracy and is interchangeable, allowing you to replace sliders or rails or even linear guide sets. The lubrication structure is simple and easy to oil.
FANUC Spindle motor
High performance AC spindle motor with excellent basic performance
High processing performance
The optimized winding design and high efficiency cooling structure provide the motor with robust and agile acceleration in high speed areas.
By increasing the rated power and torque for a short period of time, the heavy cutting capability in a short time is enhanced, thereby shortening the acceleration and deceleration time.
The new through-hole model allows for central through-cooling, with air-cooled and liquid-cooled series.
High mechanical precision and low vibration characteristics for direct connection to the spindle.
With a maximum power of 200 kW and a maximum torque of 2000 Nm, it is suitable for large machine tools. The technology of driving several axes with multiple standard amplifiers to drive one axis can further address the need for high power.
Through the spindle control technology independently developed by FANUC, it can output the same S6 rated power as the rated power of S3.
Triaxial slide rail retractor
The machine guard is used to protect the machine guide rails. He protects the machine's internal hard rails, linear guides and ball screws or drive racks from external corrosion and damage. It can effectively prevent the entry of chips and other sharp objects, and can effectively reduce the penetration of coolant through certain structural measures and suitable scraping plates.
The steel plate shield has a good seal and can prevent iron filings, anti-cooling liquid and anti-tool accidents.
1. Sturdy and durable, stable operation, low noise and beautiful appearance.
2, steel plate shield is suitable for high-speed motion machine tool rail protection is stable and no vibration noise.
3. The steel plate cover device not only protects the service life of the guard plate, but more importantly ensures the precision of the machine tool.
4. Each guard plate of the steel plate shield is pulled apart in parallel at the same time, and is simultaneously retracted in parallel, and runs freely.
5, the steel plate shield will not make the guard plate disjointed, there is impact sound, both beautiful and improve the service life of the guard plate.
6. On the basis of the original sealing strip, a layer of stainless steel cover is added to prevent the high temperature burn strip of iron filings from rubbing into the rail surface and pulling the guide rail.
Contact Person: Sophie Lau