Payment & Shipping Terms:
|Product Name:||CNC Milling Machine||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
|Power(w):||7.5/11 KW||Spindle:||7.5 KW FANUC Spindle Motor|
|Inner Structure:||Very Steady||Machine Type:||China Manufacturer Machining Center Cnc Vertical Process Center|
|Warranty:||2 Years||Voltage:||Customer's Requirement|
vertical cnc machine,
small vertical machining center
M30 Automatic Power Off System Air Conditioning System Cnc Vertical Machining Center For Processing Plumbing Fittings
1. Three-axis full stroke process: effectively enhance dynamic accuracy and service life;
2. Taiwan-made line rail: high-precision Taiwan-made three-axis rail;
3. Y-axis motor rear position: shorten the distance between the upper and lower workpieces and improve the processing convenience;
4. High-quality castings: The whole machine adopts GB300 high-grade resin sand castings, which are tempered and vibrated and natural aging treatment to eliminate internal stress;
5. Sealed sheet metal and excretion inside the multi head drilling machine;
6. TE series spindle adopts advanced precision grade P4 bearings, with high rigidity and heavy cutting featuring. The standard speed is up to 10000 RPM (BT40).
|Max. load of worktable||kg||400|
|T slot no./width/distance||mm||18x5x90|
|Travel||X axis travel||mm||800|
|Y Axis travel||mm||500|
|Spindle||spindle nose to table surface||mm||150-650|
|spidle axis to column surface||mm||572|
|Spindle head casing aperture||mm||φ140mm|
|Spindle driver||-||Belt transmission|
|Auto tools change||Maximum tool diameter||mm||Φ80(Φ130)|
|Maximum tool length||mm||300|
|Maximum tool weight||kg||8|
|Tool magazine capacity||Pieces||24|
|Tool exchange method||-||Knife arm|
|Tool exchange time (knife-to-knife)||Sec||1.8|
|Motor capacity||Controller||Syntec 22MA|
|Spindle motor (continuous / 15 minutes)||kW||7.5/11|
|Servo motor (X/Y/Z)||kW||2.6/2.6/3.0|
|Automatic lubrication device||w||35|
|Cutting fluid pump||w||840|
|Others||Air source pressure demand||kg/cm||6|
|Cutting water tank capacity||L||250|
|Floor area and height||mm||2550*2250*2400|
Series 0i-MODEL F
FANUC proposes a new method that combines analysis of machining programs and application of functions suitable for it, in place of the cycle time reduction methods that have been explored so far.
The Servo Guide is a servo adjustment tool (PC software) that promotes "visualization" of the machine. This time, a function has been added to analyze the operation of CNC at the time of processing program execution. With this function, the operation of the CNC can also be “visualized”, and it is possible to understand which part of the machining program is taking time. Based on the analysis results, it is possible to centrally manage and collectively set various cycle time reduction functions using the newly developed processing time reduction setting screen. Furthermore, the smart overlap function that optimizes the feed time and the FSSB high-speed rigid tap function that speeds up the threading can be added, making it possible to apply the optimum speed-up method to various machine tools.
FANUC Servo amplifier
Amplifier for driving servo motors and spindle motors;
A stand-alone structure makes it easy to achieve an optimized combination of amplifiers based on power supply capacity;
High processing performance;
Equipped with intelligent rigid tapping function that is effective in shortening processing time;
High operating rate;
The product contains 200V and 400V power supply specifications for customers to choose.
Fully enclosed tool magazine
the processing environment is noisy and it is not easy to enter the iron filings. Guarantee the service life of the tool magazine, reduce tool change failure, extend the service life of the spindle, and ensure the precision of machining.
Due to the rolling friction method, when the linear guide is used as the linear guide, not only the friction coefficient is reduced to 1/50 of the sliding guide, but also the difference between the dynamic friction and the static friction is small. Therefore, when the bed is running, there is no slippage, the positioning accuracy of μm can be achieved, and the machine can maintain the accuracy for a long time. The power loss of the machine can be significantly reduced, and the heat generated by the friction is small, which is suitable for high-speed operation. The special beam structure design can bear the load in the up, down, left and right directions at the same time. Easy to assemble, it maintains accuracy and is interchangeable, allowing you to replace sliders or rails or even linear guide sets. The lubrication structure is simple and easy to oil.
Manual Pulse Generator
Manual pulse generator, MPG, electronic handwheel, etc. Used for zero correction and signal segmentation of CNC machine tools, printing machines, etc. When the handwheel rotates, the encoder produces a signal corresponding to the handwheel motion. The coordinates are selected by the numerical control system and the coordinates are positioned. The manual pulse generator has an optical code disc with a shaft on its center, and has a circular pass and a dark engraved line. After shaking the hand wheel, it is read by the photoelectric transmitting and receiving device to obtain two sets of sine wave signals HA, HB, and each. The sine waves are 90 degrees out of phase. Since the two signals of HA and HB are 90 degrees apart, the positive or negative pulse can be given by the A phase before or the B phase. The servo motor is rotated forward or reverse.
The hand wheel adopts imported encoder, which has good hand feeling, long service life and clear tooth position.
With LCD display X-axis, Y-axis, Z-axis, 4-axis coordinate values, resolution 1 micron
With magnification display 1X, 10X, 100X; with axis selection display X, Y, Z, 4
Hand pulse generator has power on/off key, forward, reverse, continuous, display clear four buttons, handwheel enable button, handwheel open button
Handwheel open button: When holding the handwheel open button and then shaking the handwheel, the handwheel will have an effect. Otherwise, the handwheel will not work.
All buttons and shaft selection switches and override switches are designed with waterproof structure, dustproof, waterproof and long service life.
The transmission distance is long, the operation is stable under 40 meters; the cement wall can penetrate 15CM, normal use
With signal strength display, indicating signal connection quality.
The hand-pulsed pulse generator shell is made of high-strength material with impact resistance, and the shielded woven mesh signal transmission line is anti-interference and PU skin wear-resistant and oil-resistant. The encoder uses a non-contact optical detection structure that has the same accuracy after millions of uses. The machine is equipped with a magnet and a hook for easy installation
Auto Chip conveyor
The device has the advantages of serialization, generalization and standardization, simple operation, reliable operation, convenient disassembly and assembly, and easy maintenance. It can also be used in conjunction with other chip evacuation devices to form a variety of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a conveying device for small parts of stamping and cold pier machine tools.
2. High conveying efficiency and large selection range of conveying speed;
3. The width of the chain plate is diversified, and the structural form is divided into two types: a seamless chain plate and a seam chain plate. 4, streamlined shape, beautiful appearance, smooth chip removal.
4. With overload protection.
Contact Person: Sophie Lau